Working Principle
The operation principle involves an X-ray tube illuminating the sample to produce characteristic X-rays of elements present. These rays are analyzed based on their energy and intensity to qualitatively and quantitatively determine the chemical composition of the material.
Performance Features of HS-XT5 Instrument
- Determination Elements: Elements ranging from Fluorine (F) to Uranium (U) in the periodic table.
- Content Range: From ppm to 100%.
- Sample Form: Direct detection available for solid, liquid, and powder samples.
- Detector: A 1μm carbon window ultra-thin window electric cooling FASTSDD detector enhances signal collection strength for light elements, protected by a specially designed carbon fiber net to prevent irreversible damage from vacuum bursts.
- X-Ray Tube: Imported high-power end window ray tube ensures testing effectiveness for light elements.
- Operation: Pneumatic hydraulic assist makes operation effortless.
- Temperature Control: An adaptive constant temperature control system.
- Safety Performance: Maze design, lead shielding for X-ray generation part, interlock design. Analysis speed is fast, providing data to guide production within minutes per sample, significantly enhancing work efficiency.
- Customized Chinese Operating Software: Full-featured, easy to learn and operate, suitable for laboratory use.
- Sample Spinning: Larger detection area for more representative and stable sample testing.
- Variable Sample Chamber Design: Diameter 9cm-25cm, height 4cm-15cm, accommodating different volumes and shapes of samples with high fault tolerance.
- Protection Measures: Operation panel further from core components, equipped with a special carbon fiber net for the detector, preventing irreversible damage from vacuum bursts and protecting core parts from contamination.
- Magnetic Fluid Seal: Better vacuum level, favorable for light element detection.
- Vacuum System: Pirani vacuum gauge for precise vacuum detection.
- Circuit Control System: Using Siemens PLC module control, upgraded to industrial control unit for higher precision and extremely low failure rate, convenient for function upgrades.
- Privacy Design: Favorable for stable operation of mechanisms.
- Permanent Standard Sample Calibration: (SeaRock's unique creation) ensures instrument stability.
- Multiple Standard Sample Sets: Including imported sets to create working curves, ensuring instrument accuracy.
Main Technical Indicators
- Detector: Typical resolution of 123ev, output count rate of 1500KCPS, peak to background ratio ≥25000:1, tail ratio >1800. Features a 1μm carbon window ultra-thin window enhancing light element signal collection.
- X-Ray Tube: High voltage adjustable from 0-50Kv, current adjustable from 0-4000uA, power of 50W, stability of 0.2% over 8 hours.
- High Voltage Generator: Input voltage 24VDC, input current options of 4A, 10A, 25A (matching different X-ray tubes), output voltage of 50Kv, 60Kv, 85Kv, 0~4mA, maximum power of 50W, 75W, 200W, stability of 0.05% over 8 hours.
- Intelligent Circuit Control (German Siemens PLC): Output frequency of 2x100kHz, high-speed counters totaling 4, single phase at 200kHz for all 4, at 100kHz for 2, input points of 12, counter/timer of 256, sensor power supply capacity of 300mA.
Spectral Analysis System Control and Data Processing System
- 16-bit Analog/Digital Converter
- 24-inch Display
- Brand Computer
- 512GB Solid State Drive
- Multifunction Standard Keyboard
- Laser Printer
Dimensions and Specifications
- Size: 700mm500mm1100mm
- Weight: Approximately 100kg
Power Requirements
Working Environment
- Temperature Range: 5-30°C.
- Relative Humidity: Less than or equal to 80%.
Detection Methods and Standard Curve Drawing
- Methods: Standard curve method, theoretical coefficient method, fundamental parameter method, etc., equipped according to customer needs.
- Instrument Calibration Process: (1) With national or industry standard samples-use these samples to create curves. (2) Without standard samples-customer provides production samples (5-10 samples focusing on elements with gradient)-seek analysis from 2-3 domestically recognized testing structures-these samples serve as standard samples for drawing standard curves.
Installation, Debugging, and Training
- Unpacking Check: After equipment arrival at the installation site, both buyer and seller jointly inspect the goods' appearance and check the quantity of goods and accessories against the packing list and contract annex provided by the seller.
- Complete Set of Equipment Installation, Debugging, and Training: The seller is responsible for installation, debugging, and training the buyer's personnel. Training content includes operation steps, maintenance matters, equipment repair, precautions; after training, the buyer's personnel should be able to operate independently and maintain basic functions. After normal equipment debugging and completion of personnel training, sign the "Equipment Acceptance Report."
Additional Information
- Pressing Equipment: The diagram shows an automatic pressing machine. For manual pressing machines, customers can choose based on their situation.
1. About the sample: How could I get a sample?
Once receive your payment for samples and their express delivery and then send samples to you.
The prices of the samples are the same as those on the pricelist.
Express delivery charge depends on the quantity of the samples.
2. About price list: can I get your price list?
Yes, please tell us the products (with their code number) and order quantity, then we will offer the price by e-mail.
And our price list will keep updated every month.
3. About the shipment: what type of shipment will you use?
We usually ship the products by sea and land transportation.
4. About payment: what terms of payment do you use?
We accept TT (Telegraphic Transfer), Western Union as payment term for small order and L/C for larger order.
5. About the MOQ: What is your minimum order qty?
Our minimum order qty is 1pcs, we accept small order as trial order.
6. About compensation: what is your company's compensation policy?
We can compensate buyer's loss if our products have quality problem. For small qty problem products, we can replace with new products in next order.
For larger qty problem products, we can accept returned problematic products, then we check them and replace them by good quality products.
7. About sole-distributor: How can I be your sole-distributor?
We have special policy for sole-distributor. Please contact our sales person to get related files.
8. About OEM: could we place order by OEM style to produce our own brand products in China?
Of course you can. Welcome to do OEM.
Thanks for your interest
Audited Supplier 
){kind=link}